Antibacterial Neutral Silicone Joint Sealant VIBROSER-DDS300

• Product Details
  

  Fields Of Usage

  With very high technical values, this silicone provides excellent adhesion and filling to glass, wood, concrete, brick, tile, stone and ceramic, steel, aluminum, plastic (many) permanently with temperatures 250°C and temporarily 300°C.

  

  Process Type

  Surface Preparation:
  The surface to be applied must be hard, dry, oil-free, and dust-free.
  Mild dehydrating won’t hurt.

  Application Method:
  Adhesion if a pre-application primary is used on rough surfaces power increases.
  The joint’s minimum size is 6 mm x 6 mm, and the maximum size is 30 mm; it should be x 25 mm (width x depth).
  Suppose to ensure the appropriate size may need to be used.
  If a clean filling process is desired, masking tape can be drawn to the waterline’s edges.
  The tip of the cartridge is cut off (following the width of the despises) and placed.
  To squeeze the mastic as much as possible in one piece, make an effort.
  The squeezed mastic surface is corrected, the tape is removed before the mastic dries, and the used materials are mechanically cleared.


  

  Technical Details

  Structure Neutral silicone
  Shaped like Putty
  Curing shape With the damp of the air
  Density 1050 +/- 10 kg/m³
  Shell binding time at 23°C / 50% relative damp 5 – 10 minutes
  Drying time at 23°C / 50% relative humidity 2 mm/day
  Flow Strength ISO 7390 0 mm
  Application Temperature + 5° C to + 40° C
  Values of cured product :
  Hardness Shore A ISO 868 20 – 30
  Stress strength ISO 8339 0.35 – 0.60 MPa
  Module E 100% ISO 8339 0.25 – 0.40 MPa
  Rupture strength ISO 37 1 300 – 400%
  Elastics ISO 7389 98%
  Heat Strength up to 250° C
  permanent, temporary 300° C

  

  Shelf Life

  It can be stored in its original packaging under +25 °C in a dry and cool place for about 12 months.

  

  Weight and Pack

  300 ml of PE cartridges. (In 20s boxes)
  It is served as 600 ml of sausage. (20 pieces in a box.)

• Product Images